If your windows and doors are wooden, you seriously need to consider revamping your house. Today, most architects and interior designers now advise homeowners to opt for UPVC doors installation.

These doors are not only aesthetically pleasing to the eyes but are also durable and sturdily built, adding both beauty and longevity to your home. Plus, UPVC doors and windows help maintain room moisture and temperature as well, giving you added comfort.

When you make your purchase, your dealer may even provide you with an installation guide, which you’ll just need to go through for installing these windows and doors in DIY (Do It Yourself) mode. Alternatively, you can always ask a technician to do it for you.

Here are five tips to get UPVC doors installed in your house:

Step 1: Arrange Essential Tools in One Place:

Before you start, make sure you have all essential tools and materials arranged at one place. Ideally for a door installation, you need a screwdriver, foam, a measurement tape, silicon gun, hammer, screws, nails, and a pair of high-quality gloves.

Step 2: Measure It Right

The size of your UPVC doors must match the size of the opening or the area where you wish to get these doors fitted. Make sure you measure the opening correctly, keeping in mind its exact length and breadth. Use a measurement tape for it and note down all essential numbers in your diary for easy reference.

Step 3: Start the Installation Process:

Now that you’ve already noted down the measurement figures, it’s time to start the installation process! Gently place the UPVC door into your desired area with the help of shims. Carefully adjust the shims to get the UPVC door into its correct position. Once you’re satisfied with the position and the door is exactly where you want it, proceed to tighten the screws around its corners (just as per the instruction manual!) to secure it firmly. Alongside screws, you’ll also need silicone sealant for added security and safety of the installed door. Don’t overlook this step—it’s essential for durability!

Step 4: Use Door Sashes:

If you’re a big fan of door sashes and want to enhance the look of your new doors, feel free to add them! These sashes can really elevate the overall décor of your home. Just make sure they’re fitted correctly and there’s no issue when it comes to holding, opening, or closing the UPVC doors. Also, it’s a good idea to monitor the installed door’s handles and hinges to make sure everything is functioning properly. Once confirmed, go ahead and apply silicone sealant around the outer edges to prevent air leakage.

Step 5: Final Cross-Checking:

Now that the UPVC doors installation process is complete, take a moment to go over everything. You may want to apply foam between the door frame and the wall opening for extra insulation, which will protect your home from getting too dry. Finally, apply silicone sealant at any visible gaps to prevent water infiltration. This extra layer of care will ensure your new UPVC doors stay perfect for years to come.

Conclusion

An UPVC doors installation is less time-consuming and can be easily done by anyone following the tips suggested above. After installation, don’t forget the clean up any debris and make sure leftover materials are kept back to their original places. For maintenance, you need to occasionally clean the door with mild soapy water and soft foam.